Laerdal SimPad Manuel d'utilisateur télécharger pdf (Page 7)

English

50% 50%

3. TURN ON LINK BOX AND SIMPAD

• Turn on both units by pressing the

ON button marked for at least

half a second.

• Release the button when the LED

starts blinking green. First start up

may take a few minutes.

• When the Link Box is ready, the

ON light will turn steady green.

• Follow the instructions on the

display to select language and other

preferences.

4. STARTING SIMPAD FOR THE FIRST TIME

The rst time SimPad is turned on, it will prompt for the following congurations:

• Select language

• Set time and date

• Enter SimPad name

• Enter Link Box name

All these congurations may be altered later.

5. CONNECTION BETWEEN SIMPAD AND LINK BOX

SimPad communicates with the Link Box using WiFi. When the units are turned on for the rst time

they will set up an ad hoc network called SimLink. If no other Link Boxes are visible on the default

SimLink network, the SimPad will pair with the Link Box, remember the pairing, and reconnect when

units are turned on again.

• Connection to SimPad is indicated on the Link Box with a blue light

in the WiFi LED.

• Connection to the Link Box is indicated in the upper right corner of

SimPad’s screen with a Manikin symbol.

6. CONNECTING A SIMULATED PATIENT MONITOR

• Ensure the monitor PC and the SimPad System are connected to

the same network. See “Connections” chapter for details on network

connections.

• Select the appropriate Link Box from the manikin connection menu.

• To minimize WiFi trafc, it is recommended to connect the patient

monitor to the Link Box using a direct network cable connection.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Pas de commentaire

Laerdal SimPad Manuel d'utilisateur Page 7